Full Flow Plumbing & Drainage

hydro jetter vs snake

Hydro Jetter vs Snake: Effective Drain Cleaning Solutions Explained

When faced with a blocked drain, you have a choice between two common methods to clear it. Use a drain snake or opt for hydro jetting. A drain snake, also known as a plumbing snake or drain auger, is a tool that physically breaks through obstructions. It’s a flexible coil of wire that can navigate through the twists and turns of your pipes. By contrast, hydro jetting uses high-pressure water to remove blockages including accumulated grease, soap, and sludge.

Choosing between these methods depends on the nature of the clog and the condition of your pipes. Drain snaking is a reliable method for minor blockages and is often considered less intrusive. Hydro jetting is a powerful cleaning solution that clears the clog and cleans the inside of the pipes.

Understanding the pros and cons of each method can save you time and money. Snaking is more gentle and often used for simple blockages. Hydro jetting offers a thorough clean that can benefit your entire plumbing system. Deciding on the best course of action will ensure your drains are cleared effectively and remain in good working condition.

Table of Contents

Understanding Hydro Jetters and Drain Snakes

Effective drain cleaning is essential to maintain your plumbing system. Clogs can cause a range of problems, from slow draining sinks to completely blocked pipes. Addressing these issues quickly minimises potential water damage and keeps your drains in good working order.

Hydro Jetting

Hydro jetting uses highly pressurised water to clear blockages in your pipes. This method forces water at pressures up to 5000 PSI, breaking down and removing grease, sediment, and even tree roots. Hydro jetting is useful for comprehensive cleaning of your entire plumbing system. It is best performed by professional plumbers due to the equipment and expertise required.

Drain Snakes

A drain snake or drain auger is a more traditional approach. It involves a long and flexible metal cable that is inserted into drains to physically dislodge clogs. With an auger or a coiled “snake” at one end, it breaks through or pulls out obstructions. It is less effective at removing built-up residue along the pipe walls (compared to hydrojetting) but is often sufficient for simple clogs.

Hydro Jetter vs Drain Snake

A hydro jetter uses high-pressure water to blast through blockages in your pipes. A drain snake is a coil that manoeuvres into your plumbing to physically break down clogs. The motor of a hydro jetter is what propels water through the pipe. A drain snake relies on manual or motorised torque applied to the coil to dislodge the blockage.

Advantages of Hydro JettingDisadvantages of Hydro Jetting
Removes almost all debris with high-pressure water.Can be too powerful for fragile or damaged pipes.
Cleans the entire diameter of the pipe, which can prevent future clogs.More expensive than using a drain snake.
Advantages of a Drain SnakeDisadvantages of a Drain Snake
More gentle on pipes.May only create a small hole through the clog, leading to quicker recurrence.
Suitable for minor blockages and frequently more affordable.Less thorough cleaning compared to hydro jetting.

Ideal Situations for Hydro Jetting

Hydro jetting is most effective when you’re dealing with heavy-duty blockages that a standard drain snake can’t clear, such as tree roots or hardened scale. It’s also the go-to method for comprehensive cleaning of your plumbing system since it not only removes the blockage but thoroughly cleans out residue lining the pipes.

When to Use a Drain Snake

A drain snake is your tool of choice for easily accessible and soft clogs such as food particles or small clumps of hair. It’s also a safer option for older or weaker pipes where the force of a hydro jetter could cause damage. If you have a simple clogged drain, a drain snake often does the job without the added expense of hydro jetting.

Professional Drain Cleaning Services

When your drains are clogged, there are two choices – a DIY approach or hire a professional plumber.

You might be tempted to clear a blockage using chemicals or manual tools. However, intricate plumbing systems can be challenging to navigate, and incorrect techniques may lead to pipe damage. Not to mention the environmental impact of drain cleaners.

The move towards environmentally safe techniques in drain maintenance has seen hydro-jetting rise in popularity. This method uses only water, avoids harsh chemicals, and preserving the health of your pipes and the environment. Hydro-jetting clears blockages and removes build-ups, which can prevent potential leaks and pipe bursts.

Our professional plumbers are equipped with both drain snakes and hydro jetters. We assess your pipes using CCTV cameras and choose the right method to ensure the blockage is properly cleared without causing harm.

Leave a Comment

Your email address will not be published. Required fields are marked *